Copyright © 2024 Qingdao Burt International Trading Co. Ltd.
CROWN DRIVE CENTER FOR CK&NCK CHUCKS 1/2"
Main Features
*Turn spindles without removing your chuck from the lathe using this chuck drive centre.
*The sharp point in the centre is spring loaded and retracts as pressure is applied from the tail stock.
*The ring of 8 sharp teeth then create an extremely powerful grip.
CROWN DRIVE CENTER FOR CK&NCK CHUCKS 1/2"
Main Features
*Turn spindles without removing your chuck from the lathe using this chuck drive centre.
*The sharp point in the centre is spring loaded and retracts as pressure is applied from the tail stock.
*The ring of 8 sharp teeth then create an extremely powerful grip.
Crown diameter 12mm (1/2″)
Overall Length 55mm (2″)
Diameter of Chuck Insert End 19mm (3/4″)
Width of Jaw Clamping Channel 9mm (3/8″)
Can be matched with our 12mm Revolving crown centre, for spindle turning.
For use with CK-2.75Z, CK-3.75Z,CK-4.5Z,CK-5.5Z and CK-3.75ZN plus most other makes.
Crown diameter 12mm (1/2″)
Overall Length 55mm (2″)
Diameter of Chuck Insert End 19mm (3/4″)
Width of Jaw Clamping Channel 9mm (3/8″)
Can be matched with our 12mm Revolving crown centre, for spindle turning.
For use with CK-2.75Z, CK-3.75Z,CK-4.5Z,CK-5.5Z and CK-3.75ZN plus most other makes.